Precipitating Protons and Their Role in Ionization of the Polar Ionosphere

Spatial distributions of the electron density in the latitude range 60°–90° N were calculated on the basis of a physical model of the E and lower Fregions of the high-latitude ionosphere using statistical models of auroral proton and electron precipitation. It is shown that precipitating protons can play the key role in the ionization of the Eregion in the dusk and midnight sectors of the auroral oval. However, quantitative estimates of the contribution of protons to the ionization depend on the used statistical models of electron precipitation. Comparison of the electron density profiles calculated for two incoherent scatter radars, EISCAT (Tromsö) and ESR (Svalbard), for simultaneous precipitation of electrons and protons and for electron precipitation only show that the influence of protons is the most significant in the dusk sector over the EISCAT radar and in the midnight sector over the ESR radar. The results presented indicate the need to take protons into account when radar data are used to derive precipitating electron spectra.     

Statistical Approach to the Evaluation of the Mean Correlation Length and the Propagation Velocity of Middle-Scale Plasma Structures in the Earth's Foreshock

Based on simultaneous measurements of ion fluxes made onboard the closely separated satellites Interball-1and Magion-4, the propagation velocity of middle-scale plasma structures in the Earth's foreshock relative to the solar wind flow is estimated. The derived value of this velocity allows these structures to be identified as a fast magnetosonic wave propagating upstream of the solar wind inflowing the Earth's bow shock. An evaluation is also made of the correlation length of these disturbances in the plane perpendicular to the Sun–Earth line. This length is approximately equal to 2R _E.     

The Brazilian scientific microsatellite SACI-1

The National Space Research Institute (INPE) is developing the first Brazilian Scientific Microsatellite (SACI-1) based on the vanguard technology and on the experience acquired through projects developed by Brazilian Space Program. The SACI-1 is a 750km polar orbit satellite. The spacecraft will combine spin stabilization with geomagnetic control and has a total mass of 60 kg. The overall dimensions are 640×470×470 mm. The SACI-1 satellite shall be launched together with CBERS (China-Brazil Earth Resource Satellite). Its platform is being designed for multiple mission applications. The Brazilian Academy of Sciences has selected four scientific payloads that characterize the mission. The scientific experiments are: ORCAS (Solar and Anomalous Cosmic Rays Observation in the Magnetosphere), PLASMEX (Study of Plasma Bubbles), FOTSAT (Airglow Photometer), and MAGNEX (Geomagnetic Experiment).     

Anesthesia, surgical aid and resuscitation in manned space missions.

When discussing problems related to medical service in space flight, particular attention should be given to the specific living conditions and changes associated with space flight. In disease and injury, surgery can be provided only after conservative therapy has failed. In this context gnotobiological chambers allowing surgery in aseptic conditions seem promising. A portable set of interchangeable surgical tools should be made of light-weight alloys that can be readily sterilized. Electroanalgesia in combination with auriculoacupuncture as well as peridureal anesthesia may be used as they allow normal operations in autonomous space flight conditions. Changes in the sympatho-adrenal and kallikrein-kinin systems, as well as water-electrolyte balance, should be taken into account in developing methods and means of medical service in critical situations. Special attention should be given to the prevention and treatment of brain edema in view of weightlessness-induced cephalad fluid shifts.     

Shuttle avionics verification and integration testing

The Space Shuttle Orbiter employs a fly-by-wire control system of 200 major avionic hardware devices interfacing with five flight computers through a complex data bus system. Responses to man-in-the-loop commands are dependent on the flight software. Early program development testing of the computer and avionic hardware has been accomplished at Rockwell International's Shuttle Avionics Development Laboratory (ADL). Hardware development has led to complete multi-string system testing and flight software evaluations. This paper provides an overview of the ADL. Its role and test capabilities in support of Shuttle development are defined. The nature of computer driven test programs for the Orbiter displays, the Digital Autopilot, and flight software development describe the test bed provided by the ADL.     

Exobiological exploration of Mars.

Of all the other planets in the solar system, Mars remains the most promising for further elucidating concepts about chemical evolution and the origin of life. Strategies were developed to pursue three exobiological objectives for Mars exploration: determining the abundance and distribution of the biogenic elements and organic compounds, detecting evidence of an ancient biota on Mars, and determining whether indigenous organisms exist anywhere on the planet. The three strategies are quite similar and, in fact, share the same sequence of phases. In the first phase, each requires global reconnaissance and remote sensing by orbiters to select sites of interest for detailed in situ analyses. In the second phase, lander missions are conducted to characterize the chemical and physical properties of the selected sites. The third phase involves conducting "critical" experiments at sites whose properties make them particularly attractive for exobiology. These critical experiments would include, for example, identification of organics, detection of fossils, and detection of extant life. The fourth phase is the detailed analysis of samples returned from these sites in Earth-based laboratories to confirm and extend previous discoveries. Finally, in the fifth phase, human exploration is needed to establish the geological settings for the earlier findings or to discover and explore sites that are not accessible to robotic spacecraft.     

Engineering concepts for inflatable Mars surface greenhouses.

A major challenge of designing a bioregenerative life support system for Mars is the reduction of the mass, volume, power, thermal and crew-time requirements. Structural mass of the greenhouse could be saved by operating the greenhouse at low atmospheric pressure. This paper investigates the feasibility of this concept. The method of equivalent system mass is used to compare greenhouses operated at high atmospheric pressure to greenhouses operated at low pressure for three different lighting methods: natural, artificial and hybrid lighting.     

Surface tension-driven flows in horizontal liquid metal layers

The problem of surface tension-driven flows in horizontal liquid layers has been studied experimentally, and theoretically by direct numerical simulation and small perturbation analysis. We focus our attention on situations in which the depth of the fluid (liquid tin; small Prandtl number, Pr=0.015) is small enough to ensure the predominance of the surface tension forces over those due to the buoyancy. The surface velocity has been experimentally obtained for liquid tin layer with various aspect ratio (length to height) in the range 5<A<83. The thermal gradients are ranged from 5 to 40°K/cm. In the numerical study, the Navier-Stokes and energy equations are solved by an efficient finite difference technique. The parameters governing the flow behaviour in the liquid are varied to determine their effects on thermocapillary convection: the Reynolds number 10<Re<210⁴ and the aspect ratio 2<A<25; with Pr kept constant at Pr=0.015. The linear eigenequation resulting from small spatial disturbances of the Couette flow solution is solved using an Tau-Chebyshev approximation. A notable feature of the theoretical study is the totally different end circulations. In the region near the cold wall a multicell structure is evident. This agrees with the eigensolution which is of complex type, indicating spatial periodicity. In the hot wall region the flow is accelerated to reach the velocity value for the fully-developed Couette flow which is reached under conditions such as Re/A<20. The transition from viscous to boundary layer regime occurs for a critical value (Re/A)_c of nearly about 200, as deduced from the numerical and experimental results.     

The potential of the lichen symbiosis to cope with the extreme conditions of outer space II: germination capacity of lichen ascospores in response to simulated space conditions.

Complementary to the already well-studied microorganisms, lichens, symbiotic organisms of the mycobiont (fungi) and the photobiont (algae), were used as "model systems" in which to examine the ecological potential to resist to extreme environments of outer space. Ascospores (sexual propagules of the mycobiont) of the lichens Fulgensia bracteata, Xanthoria elegans and Xanthoria parietina were exposed to selected space-simulating conditions (up to 16 h of space vacuum at 10(-3) Pa and UV radiation at 160 nm < or = lambda < or = 400 nm), while embedded in the lichen fruiting bodies. After exposure, the ascospores were discharged and their viability was tested as germination capacity on different culture media including those containing Mars regolith simulant. It was found that (i) the germination rate on media containing Mars regolith simulant was as high as on other mineral-containing media, (ii) if enclosed in the ascocarps, the ascospores survived the vacuum exposure, the UV-irradiation as well as the combined treatment of vacuum and UV to a high degree. In general, 50 % or more viable spores were recovered, with ascospores of X. elegans showing the highest survival. It is suggested that ascospores inside the ascocarps are well protected by the anatomical structure, the gelatinous layer and the pigments (parietin and carotene) against the space parameters tested.     

Collisionless reconnection in the magnetotail

Recent developments regarding collisionless reconnection in current sheets with a finite normal magnetic field component (B_z) are reviewed. In 2-D x, z configurations the ion tearing mode is stabilized by the electron compressibility. When the y dependence is included, cross-field current instabilities can be excited. Of these, the drift kink mode appears to be particularly important. 3-D electromagnetic particle simulations indicate that this mode can act as the precursor to the growth of tearing modes and subsequent reconnection.